XTRON Series

Home » XTRON Series

XTRON Series

Xtron 433 | Xtron 544 | Xtron 744 | Xtron 955 | Xtron 1166 | Xtron 1366 | Xtron 1577

“To match the demand of greater accuracy and total reliability at higher speeds, BFW has developed XTRON Series Vertical Machining centers. These machines are rigid base C-type machines with moving table for easy access. The high dynamic structure supports rapid axis take-offs with a higher acceleration.”

XTRON Series – Next-gen VMCs, engineered for enhanced machining performance.

Ac servo drives
AC variable speed spindle motor
LM Roller Guide-ways
Hardened and ground ball screws
Feedback through absolute encoder
Automatic tool clamping – unclamping
Centralised automatic lubrication
Spindle taper air blow
Front chip disposal
Electronic counter balance for std configuration
Belt-driven Spindle

TPM friendly machines
Compact foot print
Better chip disposal with rear chip flow
Superior aesthetics
Powerful spindle with various power and torque options

Coolant Gun
Air gun
3 tier lamp
Ring Coolant around spindle
Rigid tapping
Maintenance toolkit
Rear chip disposal
Spindle with chiller unit
Chip conveyor
2/3 axis linear glass feedback
16/25/40 bar coolant through spindle
AC for electrical cabinet
Provision for 4th and 5th axis rotary tilting table
4th axis rotary table
Voltage stabilizer
Air Nozzle
Edge finder
In-line Spindle Modular design
Table mounted probe
Automatic front door

Watch XTRON Series Live In Action!

Specifications

Capacity

Capacity	Unit	XTRON-544	XTRON-755	XTRON-955	XTRON-1166	XTRON-1366	XTRON-1577
Table Longitudinal travel (X-Axis)	mm	500	700	900	1100	1300	1500
Table cross travel (Y-Axis)	mm	400	500	500	600	600	700
Head stock travel (Z-Axis)	mm	400	500	500	600	600	700
Spindle nose face to table top	mm	150-550	100-600	100-600	150-750	150-750	150-850
Increased daylight area with column height block (Optional)	mm	350-750	300-800	300-800	350-950	350-950	450-1150
Distance from floor to table top (front chip disposal)	mm	900	950	950	1000	1000	1050
Spindle center – column front distance	mm	480	540	540	660	660	735

Table

Specifications	Unit	XTRON-544	XTRON-755	XTRON-955	XTRON-1166	XTRON-1366	XTRON-1577
Table:
Table size	mm	700 * 410	900 * 510	1100 * 510	1300 * 610	1500 * 610	1700 * 710
T-slot (No./size/ pitch)	No/ mm/	3/ 14/ 150	5/ 18/ /100	5/ 18/ /100	5/ 18/ /100	5/ 18/ /100	5/ 18/ /125
Maximum load on table standard	Kg	500	900	900	1300	1300	1500

Spindle and Axes- XTRON 544,XTRON 755,XTRON 955

Spindle:		Unit	XTRON-544	XTRON-755		XTRON-955
Belt Driven (Std)	Taper	Type	BT40	BT40	BT50	BT40	BT50
	Speed	rpm	8000 (10000) (6000)	8000 (10000) (12000)	6000 (4800)	8000 (10000) (12000)	6000 (4800)
	Fanuc Mitsubishi Cont./ 30 min	kW	5.5/ 7.5	7.5/ 11		7.5/ 11	7.5/ 11
	Siemens S1/S6-40% (Option)	kW	5.5/ 8.3	9/ 13.5		9/ 13.5	9/ 13.5
Belt Driven High Power (Option)	Taper	Type	NA	BT40	BT50	BT40	BT50
	Speed (opt 1) (opt 2)	rpm	NA	8000 (6000) (10000)	6000 (4800)	8000 (6000) (10000)	6000 (4800)
	Fanuc/ Mitsubishi Cont/ 30 min	kW	NA	11/15	11/15	11/15	11/15
	Siemens S1/S6/ 40%	kW	NA	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5
Belt Driven High Power High Torque (Option)	Taper	Type	NA	BT40	BT50	BT40	BT50
	Speed	rpm	NA	6000 (4800)	6000 (4800)	6000 (4800)	6000 (4800)
	Fanuc	kW	NA	P – Series (P22)		P – Series (P22)
In line Drive (Option)	Taper	Type	BT40	BT40	NA	BT40	NA
	Fanuc/ Mitsubishi Cont/ 30 min	kW	5.5/ 7.5	7.5/ 11	NA	7.5/ 11	NA
	Siemens $1/ S6-40%	kW	5.5/ 8.3	9/ 13.5	NA	9/ 13.5	NA
	Speed (option 1)	rpm	12000	10000 (12000)	NA	10000 (12000)	NA
Gear box (Option)	Taper	Type	NA	NA	NA	NA	NA
	Speed	rpm	NA	NA	NA	NA	NA
	Fanuc/ Mitsubishi Cont, 30 min	kW	NA	NA	NA	NA	NA
	Siemens S6/ 40%	kW	NA	NA	NA	NA	NA

Spindle and Axes- XTRON 1166,XTRON 1366,XTRON 1577

Spindle:		Unit	XTRON-1166		XTRON-1366		XTRON-1577
Belt Driven (Std)	Taper	Type	BT40	BT50	BT40	BT50	BT40	BT50
	Speed	rpm	6000 (8000) (4800)	6000 (4800)	6000 (8000) (4800)	6000 (4800)	6000 (8000) (4800)	6000 (4800)
	Fanuc Mitsubishi Cont./ 30 min	kW	7.5/ 11	7.5/ 11	7.5/ 11	7.5/ 11	7.5/ 11	7.5/ 11
	Siemens S1/S6-40% (Option)	kW	NA	NA	NA	NA	NA	NA
Belt Driven High Power (Option)	Taper	Type	BT40	BT50	BT40	BT50	BT40	BT50
	Speed (opt 1) (opt 2)	rpm	6000 (8000) (4800)	6000 (4800)	6000 (8000) (4800)	6000 (4800)	6000 (8000) (4800)	6000 (4800)
	Fanuc/ Mitsubishi Cont/ 30 min	kW	11/15	11/15	11/15	11/15	11/15	11/15
	Siemens S1/S6/ 40%	kW	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5
Belt Driven High Power High Torque (Option)	Taper	Type	BT40	BT50	BT40	BT50	BT40	BT50
	Speed	rpm	6000 (4800)	6000 (4800)	6000 (4800)	6000 (4800)	6000 (4800)	6000 (8000)
	Fanuc	kW	P – Series (P22)		P – Series (P22)		P – Series (P22)
In line Drive (Option)	Taper	Type	NA	NA	NA	NA	NA	NA
	Fanuc/ Mitsubishi Cont/ 30 min	kW	NA	NA	NA	NA	NA	NA
	Siemens $1/ S6-40%	kW	NA	NA	NA	NA	NA	NA
	Speed (option 1)	rpm	NA	NA	NA	NA	NA	NA
Gear box (Option)	Taper	Type	BT40	BT50	BT40	BT50	BT40	BT50
	Speed	rpm	4500 (6000)	4500 (6000)	4500 (6000)	4500 (6000)	4500 (6000)	4500 (6000)
	Fanuc/ Mitsubishi Cont, 30 min	kW	11/15	11/15	11/15	11/15	11/15	11/15
	Siemens S6/ 40%	kW	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5	11/ 16.5

Automatic Tool Changer: Twin Arm- XTRON 544,XTRON 755,XTRON 955

Automatic Tool Changer: Twin Arm	Unit	XTRON-544	XTRON-755			XTRON-955
		BT40	BT40		BT50	BT40		BT50
Number of Tools	No	24	24	30	20	24	30	20
Pul stud-MAS 403	type	P40 T – 1	P40 T – 1		P50 T – 1	P40 T – 1		P50 T-1
Maximum tool dia with all pockets ful	mm	75	75	75	130	75	75	130
Max tool dia adjacent pockets empty	mm	140	140	140	220	140	140	220
Maximum tool length	mm	250	250	250	250	250	250	250
Maximum tool weight	kg	8	8	7	15	8	7	15
Tool to tool time	Sec	2.5	2.5	2.5	4.5	2.5	2.5	4.5

Automatic Tool Changer: Twin Arm- XTRON 1166,XTRON 1366,XTRON 1577

Automatic Tool Changer: Twin Arm	Unit	XTRON-1166			XTRON-1366			XTRON-1577
		BT40		BT50	BT40		BT50	BT 40		BT 50
Number of Tools	No	24	30	20	24	30	20	24	30	20
Pul stud-MAS 403	type	P40 T – 1		P50 T-1	P40 T-1		P50 T-1	P40 T-1		P50 T-1
Maximum tool dia with all pockets ful	mm	75	75	130	75	75	130	75	75	130
Max tool dia adjacent pockets empty	mm	140	140	220	140	140	220	140	140	220
Maximum tool length	mm	250	250	250	250	250	250	250	250	250
Maximum tool weight	kg	8	7	15	8	7	15	8	7	15
Tool to tool time	Sec	2.5	2.5	4.5	2.5	2.5	4.5	2.5	2.5	4.5

Automatic Pallet Changer(optional)

Automatic Pallet Changer (Optional)	Unit	XTRON 544	XTRON 755	XTRON 955	XTRON 1166	XTRON 1366	XTRON 1577
Number of Pallets	No	2	2	2	2	2	2
Pallets Size	mm * mm	380 * 600	480 * 800	480 * 1000	580 * 1200	580 * 1400	680 * 1600
T – slot (No./Size/Pitch)	No/mm/m	3/14/0150	3/18/0150	3/18/0150	5/18/100	5/ 18/ 100	5/ 18/ 125
Distance from the Pallet top (front Chip conveyor)	mm	1050	1200	1250	1200	1200	1250
Maximum Safe load per Pallet	kg	300	400	500	600	700	800

Accuracy as per ISO 230-2

Accuracy as per ISO 230-2	Unit	XTRON 544	XTRON 755	XTRON 955	XTRON 1166	XTRON 1366	XTRON 1577
Positioning	mm	0.01	0.012	0.012	0.016	0.016	0.016
Repeatability	mm	0.007	0.009	0.009	0.012	0.012	0.012

Installation Data

Installation Data	Unit	XTRON 544	XTRON 755	XTRON 955	XTRON 1166	XTRON 1366	XTRON 1577
Floor space (W x D)	mm * mm	2050*2450	2500*2450	2500*2450	3100*2700	3600*2700	4000*2950
Machine height (H)	mm	2730	2900	2900	3300	3300	3450
Basic machine weight (Approx)	kg	4000	5000	5200	7900	8200	10000
Total connected load (Basic machine)	KVA	18	22 \| 28	22 \| 28	28 \| 28	28 \| 28	28 \| 28