Specification | Unit | H 320 MCR | H 400 MCR | H 500 MCR |
Index Table | ||||
Pallet size | mm x mm | Dia 320 (Dia 400) | Dia 400 (Dia 500) | Dia 500 |
Pallet type | Tapped holes with butting pads | |||
Maximum load on table | kg | 300 (400) | 300 (500) | 650 |
Pallet height from ground level | mm | 950, with 100 mm ground clearance | 1200, with 100 mm ground clearance |
1080, with 100 mm ground clearance
|
Maximum job swing – diameter x height | mm | 700 x 500 | 560 x 500 (800 x 500) |
700 x 700 (900 x 700)
|
Index positions | º | 360 x 1º (360,000 x 0.001º) |
Specification | Unit | H 320 MCR | H 400 MCR | H 500 MCR |
Axes | ||||
X/ Y/ Z | mm | 500/ 350/ 350 | 500/ 400/ 400 | 500/ 550/ 500 |
Table top – spindle centre distance | mm | 100-450 | 100-500 | 170-720 |
Table centre – spindle face distance | mm | 100-450 | 100-500 | 200-700 |
Feed rate | mm/min | 1 – 40,000 | 1 – 20,000 | 1 – 20,000 |
Rapid traverse X/ Y/ Z axis | m/min | 60 | 50 | 60 |
Spindle | ||||
Power cont./ int | kW | 3.7/ 5.5/ 7.5/ 11 | 5.5/7.5 (7.5/ 11) | |
Speed (max.) | rpm | 8,000 (10,000) (12,000) | 8,000 (10,000 | |
Taper | type | BT 30 (HSK A50) | BT 40 (HSK A63) | |
Maximum torque | Nm | 35 with Siemens (58 with Mitsubishi) (70 with Fanuc) | 57 with Siemens (70 – with Mitsubishi/ Fanuc) | |
Spindle- High torque(with Fanuc only) | ||||
Power cont./ int | kW | NA | NA | 22/37(15 %ED) |
Speed (max.) | rpm | NA | NA | 14000 |
Taper | type | NA | NA | HSK A63 |
Maximum torque | Nm | NA | NA | 250 |
Specification | Unit | H 320 MCR | H 400 MCR | H 500 MCR |
Automatic Tool Changer | ||||
Pull stud | As per MAS-403 P30T-I | As per DIN 69872 | As per DIN 69872 | |
Number of tools | Nos | 20 | 20 | 20 |
Maximum tool diameter with adjacent pockets full/ empty | mm | 80 | 80/ 125 | 80/ 125 |
Maximum tool length – BT (HSK) | mm | 200 (300) | 250 (350) | 320 |
Maximum tool weight | kg | 4 | 5 | 6 |
Tool changing time (tool to tool) | s | 2.4 | 2.5 | 2.5 |
Minimum C-C time as per ISO 10791-9 | s | 3.9 | 4 | 5 |
Specification | Unit | H 320 MCR | H 400 MCR | H 500 MCR |
Installation Data | ||||
Machine weight | kg | 5,500 | 6,500 | 8,500 |
Total connected load | kVA | 25 | 45 | 55 |
Floor area (for std machine) L x W | mm x mm | ~1,400 x 4,200 | ~1,700 x 4,650 | ~1,900 x 4,100 |
Compressed air | bar | 6 | 6 | 6 |
Power supply | 415 V AC, 50 Hz, 3 Phase |
Specification | Unit | H 320 MCR | H 400 MCR | H 500 MCR |
CNC System | Siemens 828D / Mitsubishi M80/ Fanuc 0i MF |